Desktop Metal

17-4 PH Stainless Steel Powder (100 kg) | Material for Desktop Metal's Shop System metal 3D printer, binder jetting technology. Material Properties...

17-4 PH Stainless Steel v.1 Media Fill (810 cc) | Metal Rods for Metal 3D Printing Material Properties* | Heat Treat H900 Yield Strength: 970 MPa ...

Desktop Metal 17-4 PH Stainless Steel V.2 (840cc) Metal Rods | 4.32 Kg Must be sintered in a high purity retort It requires Gas no.1 (3% H2/Ar) -...

316L Stainless Steel v.1 Media Fill (810 cc) | Metal Rods   3D Printer Compatibility Desktop Metal Studio System™ 2 *Cartridges and media fills c...

316L Stainless Steel v.2 Media Fill (810 cc) | 4.4 Kg It requires Gas no.1 (3% H2/Ar) supplied through the external gas connection. NOT SOLD by DE...

4140 Chromoly Steel v.1 Media Fill (810 cc) | Metal Rods for Metal 3D Printing Must be sintered in a high purity retort OR with the use of sinteri...

4140 Chromoly Steel v.2 Media Fill (810 cc) | 4.2 Kg It must be sintered in a high purity retort It requires high purity argon supplied through th...

A2 v.2 Media Fill (810 cc) | Desktop Metal Qualified 3D Printing Material Must be sintered in a high-purity retort Requires high-purity argon supp...

Alloy Cartridge for Studio System™ Refillable media cartridge used for "media fills". It is recommended one cartridge per alloy type.

Binder Trap Liner for Desktop Metal's furnace units. Compatible 3D Printers: Studio System Shop System Quantity: 24 pieces / package Note: The ...

Desktop Metal Binder SS-01 (10L) for Shop System Metal 3D Printer Compatible 3D Printers: Desktop Metal Shop System

The Build Media Feed Tray of the Studio System metal 3D printer houses the mechanism used to transition the media from a horizontal orientation to ...

Chamber O-ring | Debinder for Studio System Bound Metal Deposition 3D Printer. O-ring creates a seal between the debind processing tank and lid. 

Chamber O-ring for Desktop Metal Furnace  Compatible 3D Printers: Studio System Shop System

Copper v.1 Media Fill (810 cc) | 4.6 Kg* Must sinter in a high purity retort OR with the use of sintering getter (BMD-CF0018). It requires Gas no....

D2 Tool Steel v.2 Media Fill (810 cc) | 5.4 Kg It must be sintered in a high-purity retort It requires high purity argon supplied through the exte...

The D4K Build Platform, also known as Build plate, Build tray or Print-bed, it is the surface of the D4K Pro printer on which the 3D printed part i...

ETEC D4K Pro Material Tray How to install the material tray: Open the printer door Release the front and back tilt tray clips Note that the tilt t...

The debinder fluid is a substance/mixture used for the binder removal from the parts that are 3D printed with Desktop Metal's 3D printer, Studio Sy...

EnvisionOne (E1) Domeless 3D Printing Material Tray Disposable. It includes a cover lid. 3D Printer Compatibility ETEC EnvisionOne

The build platform is an assembly comprised of: A large, flat platform A handle A connection cavity The flat area of the build platform is where ...

EnvisionOne High Temperature (HT) Domeless Material Tray Disposable.

The material tray for ETEC®'s PRO XL DLP 3D printer consists of two plastic frames with a special membrane called Pre-Stretched Assembly (PSA) betw...

The Desktop Metal Furnace Tray is installed into the retort ring and supports the parts during the sintering process following the metal 3D printin...