3D Printing

A2 v.2 Media Fill (810 cc) | Desktop Metal Qualified 3D Printing Material Must be sintered in a high-purity retort Requires high-purity argon supp...

IN625 v.2 Media Fill (810 cc)  Must be sintered in a high-purity retort Requires Gas no.1 (3% H2/Ar) supplied through the external gas connection....

H13 v.2 Media Fill (810 cc) | No cartridge included Must be sintered in a high-purity retort Requires high-purity argon supplied through the exter...

The retort base stabilizes the stacking retort assembly and directs gas past the sintering getter (when used). Studio System Shop System It is pa...

The retort top encloses the stacking retort assembly within the sintering furnace. Studio System Shop System It is part of the assembly stacking ...

The retort ring supports the furnace trays and encloses the parts during sintering. The furnace tray is installed into the retort rings and support...

Studio System 2™ Printer Stand A stand is not included with the Studio System printer, but it can be purchased separately. Measurements: Height: 3...

Pump Discharge Filter Rebuild Kit | Studio System Furnace consumable for preventive maintenance, specifically for replacing the furnace demister fi...

Chamber O-ring for Desktop Metal Furnace  Compatible 3D Printers: Studio System Shop System

Chamber O-ring | Debinder for Studio System 3D Printer. O-ring creates a seal between the debind processing tank and lid. 

Desktop Metal Furnace Thermocouples (set of 2) Compatible 3D Printers Shop System Studio System NOTE: A service technician is required when insta...

Alloy Cartridge for Studio System™ Refillable media cartridge used for "media fills". It is recommended one cartridge per alloy type.

Interface Media Feed Tray for Studio System 3D Printer This tray sits below the cartridges and transfers the rod from the cartridge into the extrud...

The build media feed tray of the Studio System metal 3D printer houses the mechanism used to transition the media from a horizontal orientation to ...

The furnace tray is installed into the retort rings and support parts during the sintering process following the metal 3D printing. Compatible 3D P...

EnvisionOne High Temperature (HT) Domeless Material Tray Disposable.

EnvisionOne Domeless Material Tray Disposable. It includes a cover lid.

The build platform is an assembly comprised of: A large, flat platform A handle A connection cavity The flat area of the build platform is where ...

How to install the material tray: Open the printer door Release the front and back tilt tray clips Note the tilt tray is labelled “front”: this la...

Also known as Build plate, Build tray or Print-bed, it is the surface of the D4K Pro printer on which the 3D printed part is formed. The build plat...

INFINAM® ST 6100 L resin is a black-coloured liquid photopolymer formulation, which is easy to process (low viscosity, 1-part system). The fully cu...

Interface v.2 Media Cartridge Refillable media cartridge used for "media fills." It is used for interface v.2 only.

17-4 PH Stainless Steel Powder (100kg) | Material for Desktop Metal's Shop System 3D printer.

Binder SS-01 (10L) Compatible 3D Printers: Desktop Metal Shop System