Desktop Metal

A2 v.2 Media Fill (810 cc) | Desktop Metal Qualified 3D Printing Material Must be sintered in a high-purity retort Requires high-purity argon supp...

IN625 v.2 Media Fill (810 cc)  Must be sintered in a high-purity retort Requires Gas no.1 (3% H2/Ar) supplied through the external gas connection....

H13 v.2 Media Fill (810 cc) | No cartridge included Must be sintered in a high-purity retort Requires high-purity argon supplied through the exter...

The retort base stabilizes the stacking retort assembly and directs gas past the sintering getter (when used). Studio System Shop System It is pa...

The retort top encloses the stacking retort assembly within the sintering furnace. Studio System Shop System It is part of the assembly stacking ...

Studio System 2™ Printer Stand A stand is not included with the Studio System printer, but it can be purchased separately. Measurements: Height: 3...

The retort ring supports the furnace trays and encloses the parts during sintering. The furnace tray is installed into the retort rings and support...

Pump Discharge Filter Rebuild Kit | Studio System Furnace consumable for preventive maintenance, specifically for replacing the furnace demister fi...

Chamber O-ring for Desktop Metal Furnace  Compatible 3D Printers: Studio System Shop System

Chamber O-ring | Debinder for Studio System 3D Printer. O-ring creates a seal between the debind processing tank and lid. 

Desktop Metal Furnace Thermocouples (set of 2) Compatible 3D Printers Shop System Studio System NOTE: A service technician is required when insta...

17-4 PH Stainless Steel Powder (100kg) | Material for Desktop Metal's Shop System 3D printer.

Binder SS-01 (10L) Compatible 3D Printers: Desktop Metal Shop System

Metal Media Cartridge Foam Replacement foam for the alloy cartridge Compatible metal 3D printer: Studio System™

Alloy Cartridge for Studio System™ Refillable media cartridge used for "media fills". It is recommended one cartridge per alloy type.

Interface v.2 Media Cartridge Refillable media cartridge used for "media fills." It is used for interface v.2 only.

D2 Tool Steel v.2 Media Fill (810 cc) | 5.4 Kg It must be sintered in a high purity retort It requires high purity argon supplied through the exte...

4140 Chromoly Steel v.2 Media Fill (810 cc) | 4.2 Kg It must be sintered in a high purity retort It requires high purity argon supplied through th...

316L Stainless Steel v.2 Media Fill (810 cc) | 4.4 Kg It requires Gas no.1 (3% H2/Ar) supplied through the external gas connection. NOT SOLD by DE...

17-4 PH Stainless Steel V.2 (840cc) | 4.32 Kg Must be sintered in a high purity retort It requires Gas no.1 (3% H2/Ar) supplied through the exter...

Interface V.2 Media Fill (270cc), | 0.66 Kg The Interface V.2 Media Fill (270cc) contains sufficient media to fill an interface cartridge four (4)...

Ti64 | Titanium Alloy-4V v.1 Media Fill (810 cc) | 2.56 Kg* It can be sintered in the High Purity Retort only with the sintering getter (BMD-CF001...

4140 Chromoly Steel v.1 Media Fill (810 cc) Must be sintered in a high purity retort OR with the use of sintering getter (BMD-CF0018). It requires...

Compatible metal 3D printers: Desktop Metal Studio System™ 2 *Cartridges and media fills contain a set amount of material by volume. Weights are ...