3D Printing Parts

The EnvisionOne Build Platform is an assembly comprised of: A large, flat platform A handle A connection cavity The flat area of the build platfo...

The Desktop Metal Furnace Tray is installed into the retort ring and supports the parts during the sintering process following the metal 3D printin...

EnvisionOne (E1) Domeless 3D Printing Material Tray Disposable. It includes a cover lid. 3D Printer Compatibility ETEC EnvisionOne

ETEC D4K Pro Material Tray How to install the material tray: Open the printer door Release the front and back tilt tray clips Note that the tilt t...

EnvisionOne High Temperature (HT) Domeless Material Tray Disposable.

Chamber O-ring for Desktop Metal Furnace  Compatible 3D Printers Studio System Shop System

Chamber O-ring | Debinder for Studio System Bound Metal Deposition 3D Printer. O-ring creates a seal between the debind processing tank and lid. 

Desktop Metal T1 or T2 Furnace Thermocouples (set of 2) Compatible 3D Printers Shop System Studio System NOTE: A service technician is required w...

The Build Media Feed Tray of the Desktop Metal Studio System metal 3D printer houses the mechanism for transitioning the media from a horizontal to...

Desktop Metal Interface Media Feed Tray for Studio System 3D Printer This tray sits below the cartridges and transfers the rod from the cartridge i...

The D4K Build Platform, also known as the Build plate, Build tray, or Print Bed, is the surface of ETEC's D4K Pro printer on which the 3D-printed p...

Alloy Cartridge for Studio System™ Refillable media cartridge used for "media fills". It is recommended one cartridge per alloy type.

Building Platform for 2CREATE laser powder bed fusion 3D printer. Depending on the application, different substrate plates must be used. All substr...

Desktop Metal's Retort Ring supports the furnace trays and encloses the parts during sintering. The furnace tray is installed into the retort rings...

Desktop Metal's Retort Top encloses the stacking retort assembly within the sintering furnace. Studio System Shop System It is part of the assemb...

Desktop Metal's retort base stabilizes the stacking retort assembly and directs gas past the sintering getter (when used). Studio System Shop Syst...

Silicone coater lip coater for 2OneLab's 2CREATE metal 3D printer ensures optimum print quality thanks to its flexibility. It is recommended to cha...

Pre-Filter, Non-reactive for 2OneLab's 2CREATE metal 3D printer. The pre-filter of the 2CREATE collects most of the smoke generated during the proc...

Particle Filter H13 | Non-reactive  The HEPA main filter can filter even the smallest dirt particles from the process gas. This protects the motor ...

Spare Bottle with Matching Flange! | For 2CREATE Laser Powder Bed Fusion Metal 3D Printer It is designed to integrate with the 2CREATE overflow sys...

Replacement Screen for the 2Sieve Station by 2OneLab This screen features a mesh size of 63µm and is crafted from a specialized fabric, optimized f...

Cartridge Filter for the 2CREATE and 2CREATE+ systems. This cartridge filter ensures reliable purification of the exhaust air from the unit. The sp...

Protection Glass for 2CREATE Metal 3D Printer The high-performance protective glass for the 2CREATE is made of premium quartz glass and features a ...

Coater Knife Plate The silicone lip on the Coater of the 2CREATE is held in position with the Coater Knife Plate. This component should only be rep...

The material tray for ETEC®'s PRO XL DLP 3D printer consists of two plastic frames with a special membrane called Pre-Stretched Assembly (PSA) betw...

Titanium Building Platform for 2oneLab's 2CREATE laser powder bed fusion 3D printer. Depending on the application, different substrate plates must ...

Aluminum Building Platform for 2oneLab's 2CREATE laser powder bed fusion 3D printer. Depending on the application, different substrate plates must ...

Electromagnetic Door Lock for 2oneLab's 2CREATE product family. 2CREATE and 2CREATE Plus are laser powder bed fusion 3D printers for commercial and...

Einstein Platform Assembly | ETEC The build platform is an assembly comprised of: A large, flat platform A handle A connection cavity The flat ar...

Resin Tray for Einstein™ 3D Printer The material tray consists of two frames with a special membrane called Pre-Stretched Assembly (PSA) between th...

Studio System 3D Printer | Nozzle Replacement Tool Pack This package includes the fixture and tools required to disassemble the print head and rep...

Studio System Replacement Nozzles, 400µm (x5) Comes in a pack of five nozzles Compatible 3D Printer Desktop Metal Studio System™ 2

Studio System Replacement Nozzles, 250µm (x5) Comes in a pack of five nozzles Compatible 3D Printer Desktop Metal Studio System™ 2