Desktop Metal

4140 Chromoly Steel v.2 Media Fill (810 cc) | 4.2 Kg It must be sintered in a high purity retort It requires high purity argon supplied through th...

316L Stainless Steel v.2 Media Fill (810 cc) | 4.4 Kg It requires Gas no.1 (3% H2/Ar) supplied through the external gas connection. NOT SOLD by DE...

Desktop Metal 17-4 PH Stainless Steel V.2 (840cc) Metal Rods | 4.32 Kg Must be sintered in a high purity retort It requires Gas no.1 (3% H2/Ar) -...

Desktop Metal Interface V.2 Media Fill (270cc), | 0.66 Kg The Interface V.2 Media Fill (270cc) contains sufficient media to fill an interface cart...

Ti64 | Titanium Alloy-4V v.1 Media Fill (810 cc) | 2.56 Kg* It can be sintered in the High Purity Retort only with the sintering getter (BMD-CF001...

4140 Chromoly Steel v.1 Media Fill (810 cc) | Metal Rods for Metal 3D Printing Must be sintered in a high purity retort OR with the use of sinteri...

316L Stainless Steel v.1 Media Fill (810 cc) | Metal Rods   3D Printer Compatibility Desktop Metal Studio System™ 2 *Cartridges and media fills c...

17-4 PH Stainless Steel v.1 Media Fill (810 cc) | Metal Rods for Metal 3D Printing Material Properties* | Heat Treat H900 Yield Strength: 970 MPa ...

Copper v.1 Media Fill (810 cc) | 4.6 Kg* Must sinter in a high-purity retort OR with the use of a sintering getter (BMD-CF0018). It requires Gas n...

Desktop Metal Sintering Getter (x20) The “sintering getter” is used to create a higher purity atmosphere by acting as a sacrificial material for i...

Desktop Metal H13 v.1 Media Fill / Metal Rods (810 cc) | 4.2 Kg* H13 tool steel is a chromium molybdenum hot work steel. Must be sintered in a hig...

Interface Media Cartridge v.1 for Desktop Metal Studio System The Ceramic Release Layer™ is a crucial component of the BMD (Bound Metal Depositi...

Desktop Metal Interface Media Feed Tray for Studio System 3D Printer This tray sits below the cartridges and transfers the rod from the cartridge i...

Desktop Metal Nozzle Brush for Studio System 3D printer. Important: One brush per material type is recommended. Packaging 2 brushes per pack

The Build Media Feed Tray of the Desktop Metal Studio System metal 3D printer houses the mechanism for transitioning the media from a horizontal to...

Desktop Metal Setter Plate | Furnace  Thin ceramic plates. Parts sit on top of the setter plate during sintering, preventing them from coming into ...

The Desktop Metal Furnace Tray is installed into the retort ring and supports the parts during the sintering process following the metal 3D printin...

Edwards Mechanical Pump Oil (1L) for Desktop Metal's Studio System & Shop System Furnace Units For the great functionality of metal 3D printers...

Binder Trap Liner for Desktop Metal's furnace units. Packaging 24 pieces/package Note: The binder trap liner replacement process can be triggered...

Desktop Metal Waste Canister for Debinder 3D Printer Compatibility Studio System 3D Printer