3D Printing

Parts made using EPIC Green resin evaporate at moderate burn-out temperatures without reacting with your investment and offer an extremely low ther...

With ETEC's EC-500, you can obtain the highest resolution and crispest lost wax casting material available without sacrificing speed. Properties: ...

Soft ToughRubber™ (STR) or DuraChain STR delivers the feel and mechanical properties of silicone with the ability to be 3D printing at high resolut...

Tough, high-strength rubber with shore A90 hardness and high elongation, ideal for a wide range of applications. Adaptive3D ETR 90 Black | DuraChai...

Tough, high-strength rubber with shore A70 hardness and extremely high elongation. Adaptive3D ETR 70 | DuraChain ETR, Elastic ToughRubber™ unlocks ...

High rebound material with elastomeric behaviour for benchtop 3D printers. Henkel® LOCTITE® 3D IND402 is a benchtop single-component elastomeric ma...

High-temperature resistant material for end-use parts and tooling, including molds. Henkel® LOCTITE® 3D IND147 delivers high stiffness and toughnes...

Henkel® LOCTITE® 3955™ | HDT280 FST High-performance, flame-retardant material, ideal for the most demanding applications, including aerospace. Key...

High-strength and high-elongation plastic with good impact resistance and an HDT of 100°C LOCTITE® IND406 is a tough, rigid, and durable material t...

Tough, medical-grade photopolymer capable of meeting biocompatibility standards. LOCTITE® MED413 is a medical-grade, high-modulus photopolymer capa...

Ceramic-filled, high-temperature resins for tough and stiff parts at extremely high resolutions. ETEC’s RC materials contain ceramic particles allo...

ETEC’s quick building Q-View  resin is ideal for providing fast design verification models. This exciting material is capable of impressive print ...

ETEC’s E-Glass 2.0 material is a transparent material for use on ETEC's 3D printers. It features excellent surface finish quality and resolution. I...

ETEC's R5 is a liquid DLP photopolymer that produces robust, accurate, and functional parts. Exhibits superior properties, strong memory retention,...

WIC Series is a high-resolution, castable material with nano-wax for clean burnout. With 20% powder wax content, WIC 100 delivers fine print detail...

PIC 100 Series resins have been developed for direct investment casting applications. They offer excellent burnout properties and build with the hi...

ETEC E-RigidForm is a polyurethane-like resin that 3D prints strong, hard, and stiff end-use parts. It has high tensile strength, delivers good hea...

D2 Tool Steel v.2 Media Fill (810 cc) | 5.4 Kg It must be sintered in a high-purity retort It requires high purity argon supplied through the exte...

4140 Chromoly Steel v.2 Media Fill (810 cc) | 4.2 Kg It must be sintered in a high purity retort It requires high purity argon supplied through th...

316L Stainless Steel v.2 Media Fill (810 cc) | 4.4 Kg It requires Gas no.1 (3% H2/Ar) supplied through the external gas connection. NOT SOLD by DE...

Desktop Metal 17-4 PH Stainless Steel V.2 (840cc) Metal Rods | 4.32 Kg Must be sintered in a high purity retort It requires Gas no.1 (3% H2/Ar) -...

Desktop Metal Interface V.2 Media Fill (270cc), | 0.66 Kg The Interface V.2 Media Fill (270cc) contains sufficient media to fill an interface cart...

Ti64 | Titanium Alloy-4V v.1 Media Fill (810 cc) | 2.56 Kg* It can be sintered in the High Purity Retort only with the sintering getter (BMD-CF001...

4140 Chromoly Steel v.1 Media Fill (810 cc) | Metal Rods for Metal 3D Printing Must be sintered in a high purity retort OR with the use of sinteri...

316L Stainless Steel v.1 Media Fill (810 cc) | Metal Rods   3D Printer Compatibility Desktop Metal Studio System™ 2 *Cartridges and media fills c...

17-4 PH Stainless Steel v.1 Media Fill (810 cc) | Metal Rods for Metal 3D Printing Material Properties* | Heat Treat H900 Yield Strength: 970 MPa ...

Copper v.1 Media Fill (810 cc) | 4.6 Kg* Must sinter in a high-purity retort OR with the use of a sintering getter (BMD-CF0018). It requires Gas n...

Desktop Metal Sintering Getter (x20) The “sintering getter” is used to create a higher purity atmosphere by acting as a sacrificial material for i...

Desktop Metal H13 v.1 Media Fill / Metal Rods (810 cc) | 4.2 Kg* H13 tool steel is a chromium molybdenum hot work steel. Must be sintered in a hig...

Interface Media Cartridge v.1 for Desktop Metal Studio System The Ceramic Release Layer™ is a crucial component of the BMD (Bound Metal Depositi...

Desktop Metal Nozzle Brush for Studio System 3D printer. Important: One brush per material type is recommended. Packaging 2 brushes per pack

Desktop Metal Setter Plate | Furnace  Thin ceramic plates. Parts sit on top of the setter plate during sintering, preventing them from coming into ...

ETEC's Starter Kit for the D4K 3D printer includes: Cone-shaped paint filters Digital callipers Ethernet cable Glass scraper Paint scraper Power s...