3D Printing

Easy Cast 2.0  | ETEC Resin is a breakthrough material for the high-speed printing of castable models. It is a photopolymer with the highest wax co...

ETEC D4K Pro Material Tray How to install the material tray: Open the printer door Release the front and back tilt tray clips Note that the tilt t...

Resin Tray for Einstein™ 3D Printer The material tray consists of two frames with a special membrane called Pre-Stretched Assembly (PSA) between th...

Henkel® LOCTITE® IND 405 | HDT50 High Elongation Photoplastic A high-strength engineering plastic with good impact resistance and excellent surfa...

Henkel® LOCTITE® 3843 HDT60 High Toughness Black is an ideal material for end-use parts production or functional prototyping. Semi-flexible ABS-lik...

Molding material, designed for high-temperature and high-pressure applications. ETEC’s HTM140 High-Temperature Mold Material is an ideal material f...

The debinder fluid is a substance/mixture used for the binder removal from the parts that are 3D printed with Desktop Metal's 3D printer, Studio Sy...

Desktop Metal Studio System | 2 print sheets. Quantity: 50 sheets per pack

Formlabs Nylon 12 Powder combines the excellent properties of both general-purpose and biocompatible Nylon 12 Powder with the versatility of white ...

Einstein Platform Assembly | ETEC The build platform is an assembly comprised of: A large, flat platform A handle A connection cavity The flat ar...

BASF Ultracur3D® RG 3280 is a ceramic-filled resin with exceptionally high stiffness and temperature resistance. It is recommended to print small t...

Electromagnetic Door Lock for 2oneLab's 2CREATE product family. 2CREATE and 2CREATE Plus are laser powder bed fusion 3D printers for commercial and...

The material tray for ETEC®'s PRO XL DLP 3D printer consists of two plastic frames with a special membrane called Pre-Stretched Assembly (PSA) betw...

A2 v.2 Media Fill (810 cc) | Desktop Metal Qualified 3D Printing Material Must be sintered in a high-purity retort Requires high-purity argon supp...

Desktop Metal Nickel Alloy IN625 v.2 Media Fill (810 cc) for Studio System metal 3D printer  Must be sintered in a high-purity retort Requires Gas...

Desktop Metal H13 v.2 Media Fill (810 cc)/Metal Rods | No cartridge included Must be sintered in a high-purity retort Requires high-purity argon s...

Desktop Metal's retort base stabilizes the stacking retort assembly and directs gas past the sintering getter (when used). Studio System Shop Syst...

Desktop Metal's Retort Top encloses the stacking retort assembly within the sintering furnace. Studio System Shop System It is part of the assemb...

Desktop Metal's Retort Ring supports the furnace trays and encloses the parts during sintering. The furnace tray is installed into the retort rings...

Studio System 2™ Printer Stand A stand is not included with the Studio System printer, but it can be purchased separately. Measurements: Height: 3...

Desktop Metal Pump Discharge Filter Rebuild Kit | Studio System Furnace consumable for preventive maintenance, specifically for replacing the furna...

Chamber O-ring for Desktop Metal Furnace  Compatible 3D Printers: Studio System Shop System

Chamber O-ring | Debinder for Studio System Bound Metal Deposition 3D Printer. O-ring creates a seal between the debind processing tank and lid. 

Desktop Metal T1 or T2 Furnace Thermocouples (set of 2) Compatible 3D Printers Shop System Studio System NOTE: A service technician is required w...

Alloy Cartridge for Studio System™ Refillable media cartridge used for "media fills". It is recommended one cartridge per alloy type.

Desktop Metal Interface Media Feed Tray for Studio System 3D Printer This tray sits below the cartridges and transfers the rod from the cartridge i...

The Build Media Feed Tray of the Studio System metal 3D printer houses the mechanism used to transition the media from a horizontal orientation to ...

The Desktop Metal Furnace Tray is installed into the retort ring and supports the parts during the sintering process following the metal 3D printin...

EnvisionOne High Temperature (HT) Domeless Material Tray Disposable.

EnvisionOne (E1) Domeless 3D Printing Material Tray Disposable. It includes a cover lid. 3D Printer Compatibility ETEC EnvisionOne

The build platform is an assembly comprised of: A large, flat platform A handle A connection cavity The flat area of the build platform is where ...

The D4K Build Platform, also known as Build plate, Build tray or Print-bed, it is the surface of the D4K Pro printer on which the 3D printed part i...

INFINAM® ST 6100 L resin is a black-coloured liquid photopolymer formulation, which is easy to process (low viscosity, 1-part system). The fully cu...

Desktop Metal Interface v.2 Media Cartridge Refillable media cartridge used for "media fills." It is used for interface v.2 only.

17-4 PH Stainless Steel Powder (100 kg) | Material for Desktop Metal's Shop System metal 3D printer, binder jetting technology. Material Properties...

Desktop Metal Binder SS-01 (10L) for Shop System Metal 3D Printer Compatible 3D Printers: Desktop Metal Shop System

Desktop Metal Metal Media Cartridge Foam Replacement foam for the alloy cartridge Compatible metal 3D printer: Studio System™

Desktop Metal Waste Canister for Debinder 3D Printer Compatibility Studio System 3D Printer

Binder Trap Liner for Desktop Metal's furnace units. Compatible 3D Printers: Studio System Shop System Quantity: 24 pieces / package Note: The ...

Edwards Mechanical Pump Oil (1L) for Desktop Metal's Studio System & Shop System Furnace Units For the great functionality of metal 3D printers...

Tough, high-strength rubber with shore A90 hardness and high elongation, ideal for a wide range of applications. Elastic ToughRubber™ (ETR) 90 Whit...

ABS Hi-Impact is a tough 3D printing material, suitable for high-quality prototypes of items in categories such as automotive and consumer goods an...

ETEC's ABS-type material for digital light processing (DLP) 3D printing. Contact our 3D printing experts for general inquiries about 3D printing ma...

ABS Tough Hi-Impact is an extremely tough ABS-like 3D printing material for various applications, including snap-fit items and assembly application...

ETEC's R5-385 is a chemical—and water-resistant polymer that produces robust, accurate, and functional parts. It is also excellently tolerant of a ...

ETEC’s innovative direct investment casting material, EC3000, has three times more wax than any polymer-based material, including EC500. It does no...

Parts made using EPIC evaporate at moderate burn-out temperatures without reacting with your investment and offer an extremely low thermal expansio...

With ETEC's EC-500, you can obtain the highest resolution and crispest lost wax casting material available without sacrificing speed. Properties: ...