3D Printing

Desktop Metal Binder SS-01 (10L) for Shop System Metal 3D Printer Compatible 3D Printer Desktop Metal Shop System

Desktop Metal Metal Media Cartridge Foam Replacement foam for the alloy cartridge Compatible metal 3D printer: Studio System™

Desktop Metal Waste Canister for Debinder 3D Printer Compatibility Studio System 3D Printer

Binder Trap Liner for Desktop Metal's furnace units. Packaging 24 pieces/package Note: The binder trap liner replacement process can be triggered...

Edwards Mechanical Pump Oil (1L) for Desktop Metal's Studio System & Shop System Furnace Units For the great functionality of metal 3D printers...

D2 Tool Steel v.2 Media Fill (810 cc) | 5.4 Kg It must be sintered in a high-purity retort It requires high purity argon supplied through the exte...

4140 Chromoly Steel v.2 Media Fill (810 cc) | 4.2 Kg It must be sintered in a high purity retort It requires high purity argon supplied through th...

316L Stainless Steel v.2 Media Fill (810 cc) | 4.4 Kg It requires Gas no.1 (3% H2/Ar) supplied through the external gas connection. NOT SOLD by DE...

Desktop Metal 17-4 PH Stainless Steel V.2 (840cc) Metal Rods | 4.32 Kg Must be sintered in a high purity retort It requires Gas no.1 (3% H2/Ar) -...

Desktop Metal Interface V.2 Media Fill (270cc), | 0.66 Kg The Interface V.2 Media Fill (270cc) contains sufficient media to fill an interface cart...

Ti64 | Titanium Alloy-4V v.1 Media Fill (810 cc) | 2.56 Kg* It can be sintered in the High Purity Retort only with the sintering getter (BMD-CF001...

4140 Chromoly Steel v.1 Media Fill (810 cc) | Metal Rods for Metal 3D Printing Must be sintered in a high purity retort OR with the use of sinteri...

316L Stainless Steel v.1 Media Fill (810 cc) | Metal Rods   3D Printer Compatibility Desktop Metal Studio System™ 2 *Cartridges and media fills c...

17-4 PH Stainless Steel v.1 Media Fill (810 cc) | Metal Rods for Metal 3D Printing Material Properties* | Heat Treat H900 Yield Strength: 970 MPa ...

Copper v.1 Media Fill (810 cc) | 4.6 Kg* Must sinter in a high-purity retort OR with the use of a sintering getter (BMD-CF0018). It requires Gas n...

Desktop Metal Sintering Getter (x20) The “sintering getter” is used to create a higher purity atmosphere by acting as a sacrificial material for i...

Desktop Metal H13 v.1 Media Fill / Metal Rods (810 cc) | 4.2 Kg* H13 tool steel is a chromium molybdenum hot work steel. Must be sintered in a hig...

Interface Media Cartridge v.1 for Desktop Metal Studio System The Ceramic Release Layer™ is a crucial component of the BMD (Bound Metal Depositi...

Desktop Metal Nozzle Brush for Studio System 3D printer. Important: One brush per material type is recommended. Packaging 2 brushes per pack

Desktop Metal Setter Plate | Furnace  Thin ceramic plates. Parts sit on top of the setter plate during sintering, preventing them from coming into ...