Post-Processing Systems/Accessories

PLM-101-SUB PolyJet Support Removal Detergent by PostProcess™ for Submersed Vortex Cavitation (SVC) machines: DEMI 4000  DEMI 910 DEMI 800 Series ...

M-CAC | Ceramic Abrasive Cylinder Surface Finish Media by PostProcess Technologies™ Used in combination with PLM-001-SURF media cleaning agent, fo...

M-CATS | Ceramic Abrasive Triangle Small Surface Finish Media by PostProcess Technologies™ Used in combination with PLM-001-SURF media cleaning ag...

M-CATL | Ceramic Abrasive Triangle Large Surface Finish Media by PostProcess Technologies™ Used in combination with PLM-001-SURF media cleaning ag...

M-SPC | Special Porcelain Ceramic Surface Finish Media by PostProcess Technologies™ Used in combination with PLM-001-SURF media cleaning agent, fo...

M-CTS | Ceramic Surface Finish Media by PostProcess Technologies™ Used in combination with PLM-001-SURF media cleaning agent, for Suspended Rotati...

M-CAT | Ceramic Abrasive Triangle Surface Finish Media by PostProcess Technologies™ Used in combination with PLM-001-SURF media cleaning agent, fo...

UPM2 | Polyester Abrasive Surface Finish Media by PostProcess Technologies™ Used in combination with PLM-001-SURF media cleaning agent, for Suspen...

PLM-SURF-001 | Polygone Surface Finish Detergent is a media cleaning agent used in combination with applicable abrasive or dye media, for the Suspe...

UPM2 | Small Porcelain Polishing Surface Finish Media by PostProcess Technologies™ Used in combination with PLM-001-SURF media cleaning agent, for...

UPM1 | Porcelain Polishing Surface Finish Media by PostProcess Technologies™ Used in combination with PLM-001-SURF media cleaning agent, for Suspe...

AUX-400-RINSE is an organic-based rinse solution developed as an effective alternative to Isopropyl Alcohol or IPA for the final rinse step in post...

PLM-403-SUB Resin Removal Detergent by PostProcess™ to remove the excess resin of 3D-printed parts for Submersed Vortex Cavitation (SVC) machines: ...

AUX-101-SUB | PostProcess™ PolyJet Detergent Removes brittleness in PolyJet 3D-printed parts, sustained from support removal cleaning. Packaging O...

The Firing Tray W (Honeycomb) for VITA SMART.FIRE® is used for crowns and bridges.  

VITA SMART.FIRE® is a firing unit explicitly developed for dental practices for the crystallization, glaze, stain, and corrective firing of all com...

Firing Pliers for VITA SMART.FIRE®, a firing unit explicitly developed for dental practices for the crystallization, glaze, stain, and corrective f...

Platinum pins for firing tray W, 6 pcs. VITA SMART.FIRE®is a firing unit explicitly developed for dental practices for the crystallization, glaze, ...

Firing pad round (Ø 44 mm), two pieces, for VITA SMART.FIRE®, a firing unit explicitly developed for dental practices for the crystallization, glaz...

110V VITA Cable for VITA SMART.FIRE  D47014, 110V with IEC E19 plug VITA SMART.FIRE® is a firing unit developed specifically for dental practices f...

VITA Firing Base for Vacuum Furnaces | VITA Smart. Fire

Sinter Place Kit, Ø 100 mm Set. It includes: insulating body, firing table ring, Ø 100 mm, 36 mm height pliers for secure placement of the firing...

Dry electrolyte for DLyte Desktop PRO and Dental | Industrial | Healthcare sector developed to treat materials included in CoCr Group with LF | HF ...

Dry electrolyte, designed for use with DLyte Desktop PRO in the dental, industrial, and healthcare sectors. This electrolyte is formulated to treat...

Dry electrolyte for DLyte 100 and Dental sector developed to treat materials included in Titanium Based Alloys Group with HF | HF+ parameters. The ...

Dry electrolyte for DLyte 10 and Dental sector developed to treat materials included in Titanium Based Alloys Group with HF | HF+ parameters. The e...

Dry Electrolyte for DLyte 1 system and Dental sector, developed to treat Titanium Based Alloys with HF | HF+ parameters. This electrolyte solution ...

Dry Electrolyte solution for DLyte 100 system and Dental sector was engineered to treat materials in the CoCr Group with LF | HF | HF+ parameters. ...

GPAINNOVA's Dry Electrolyte is specifically designed for the DLyte 10 machine and dental industry. It is specially formulated to treat materials in...

Introducing GPAINNOVA's Dry Electrolyte designed specifically for DLyte 1 machine and the dental industry. This electrolyte is specially formulated...

The Parts Washing Apparatus (PWA 2000) is a convenient tool to assist in removing uncured material from 3D printed models. The removable washing co...

ETEC's UVCA 3000 is a large UV light flood lamp for post-processing UV-sensitive curing resins for industrial and consumer goods applications. This...

PCA 2000 XL Curing Chamber for PCA 2000 Parts Curing Apparatus.

The PCA 4000 Curing Chamber is the ideal solution for post-curing parts that have been 3D printed using cDLM or DLP technologies. The PCA 4000 util...

The PCA 2000 Parts Curing Apparatus is the ideal solution for post-curing parts that have been 3D printed using cDLM or DLP technologies. It utiliz...

The Otoflash (for biocompatible resins) is a light polymerization chamber for the hardening/curing of light-curing resins for jewelry, dental and o...