3D Printing

Resin Tray for Einstein™ 3D Printer The material tray consists of two frames with a special membrane called Pre-Stretched Assembly (PSA) between th...

The debinder fluid is a substance/mixture used for the binder removal from the parts that are 3D printed with Desktop Metal's 3D printer, Studio Sy...

Desktop Metal Studio System | 2 print sheets. Quantity: 50 sheets per pack

The material tray for ETEC®'s PRO XL DLP 3D printer consists of two plastic frames with a special membrane called Pre-Stretched Assembly (PSA) betw...

A2 v.2 Media Fill (810 cc) | Desktop Metal Qualified 3D Printing Material Must be sintered in a high-purity retort Requires high-purity argon supp...

Desktop Metal Nickel Alloy IN625 v.2 Media Fill (810 cc) for Studio System metal 3D printer  Must be sintered in a high-purity retort Requires Gas...

Desktop Metal H13 v.2 Media Fill (810 cc)/Metal Rods | No cartridge included Must be sintered in a high-purity retort Requires high-purity argon s...

Desktop Metal's retort base stabilizes the stacking retort assembly and directs gas past the sintering getter (when used). Studio System Shop Syst...

Desktop Metal's Retort Top encloses the stacking retort assembly within the sintering furnace. Studio System Shop System It is part of the assemb...

Desktop Metal's Retort Ring supports the furnace trays and encloses the parts during sintering. The furnace tray is installed into the retort rings...

Studio System 2™ Printer Stand A stand is not included with the Studio System printer, but it can be purchased separately. Measurements: Height: 3...

Desktop Metal Pump Discharge Filter Rebuild Kit | Studio System Furnace consumable for preventive maintenance, specifically for replacing the furna...

Chamber O-ring for Desktop Metal Furnace  Compatible 3D Printers: Studio System Shop System

Chamber O-ring | Debinder for Studio System Bound Metal Deposition 3D Printer. O-ring creates a seal between the debind processing tank and lid. 

Desktop Metal T1 or T2 Furnace Thermocouples (set of 2) Compatible 3D Printers Shop System Studio System NOTE: A service technician is required w...

Alloy Cartridge for Studio System™ Refillable media cartridge used for "media fills". It is recommended one cartridge per alloy type.

Desktop Metal Interface Media Feed Tray for Studio System 3D Printer This tray sits below the cartridges and transfers the rod from the cartridge i...

The Build Media Feed Tray of the Studio System metal 3D printer houses the mechanism used to transition the media from a horizontal orientation to ...

The Desktop Metal Furnace Tray is installed into the retort ring and supports the parts during the sintering process following the metal 3D printin...

Desktop Metal Interface v.2 Media Cartridge Refillable media cartridge used for "media fills." It is used for interface v.2 only.

17-4 PH Stainless Steel Powder (100 kg) | Material for Desktop Metal's Shop System metal 3D printer, binder jetting technology. Material Properties...

Desktop Metal Binder SS-01 (10L) for Shop System Metal 3D Printer Compatible 3D Printers: Desktop Metal Shop System

Desktop Metal Metal Media Cartridge Foam Replacement foam for the alloy cartridge Compatible metal 3D printer: Studio System™

Desktop Metal Waste Canister for Debinder 3D Printer Compatibility Studio System 3D Printer