Castable Wax Resin, 1L | Form 4

With 20% wax fill, Formlabs Castable Wax Resin captures intricate features and offers a smooth surface finish for accurate castings with zero ash content and clean burnout. Printed parts are strong enough to handle with no post-cure required,

• For dental: Formlabs Castable Wax Resin produces highly accurate patterns for casting and pressing dental prosthetics. Tested at length by dental technicians, Castable Wax Resin easily makes 3D-printed patterns for copings, substructures, full-contour crowns, and removable partial denture frameworks.
  
  
• For jewelry: Formlabs Castable Wax Resin offers high strength and stiffness, making it capable of printing ultrafine structures. The high green strength ensures excellent shape retention for thin patterns such as wire filigree. For heavier jewelry, we recommend using Castable Wax 40 Resin.

Supports print resolutions: 25 and 50 microns.

Post-curing is not required. Allow parts to fully dry before casting.

Applications

• Delicate filigree designs
• Custom try-ons
• Direct investment casting
• Thin pieces with fine details

Material Properties

• Ultimate Tensile Strength: 12 MPa
• Tensile Modulus: 220 MPa
• Elongation: 13%
• Temp @ 5% Mass Loss: 249 ºC
• Ash Content (TGA): 0.0 - 0.1%

Data was obtained from green parts, printed using Form 2, Castable 50 μm Fine Detail settings and washed without post-cure.

3D Printer Compatibility:

• Formlabs® Form 4
• Formlabs® Form 4B