H13 v.2 Media Fill (810 cc)

Desktop Metal H13 v.2 Media Fill (810 cc)/Metal Rods | No cartridge included

• Must be sintered in a high-purity retort
• Requires high-purity argon supplied through the external gas connection.
  NOT SOLD BY DESKTOP METAL

Material Properties*

• Yield Strength: 1370 MPa 
• Ultimate Tensile Strength (XY axis): 1700 MPa
• Elongation at Break: 2.8%
• Youngs' Modulus: 196 GPa
• Hardness, HRC: 46
• Density: 7.36 g/cc

*After Quench & Temper |  Heat treated samples were austenitized at 1040 ºC for 30 minutes, air cooled, and then double tempered at 570 ºC for 1 hour per temper.
End-use material performance is impacted (+/-) by certain factors including but not limited to part geometry and design, application and evaluation conditions, etc.
Tensile properties, hardness and density data reported are mean values minus 1 sigma.

Features & Applications

• Hot work tool steel
• Surface can be carburized or nitrided
• Die cast dies
• Extrusion dies
• Punches
• Medium wear resistance

3D Printer Compatibility

• Desktop Metal Studio System (Bound Metal Deposition technology)