Skip to content
FOR A LIMITED TIME SAVE 10% ON ALL FORMLABS RESIN WITH CODE FORM4LAUNCH
FOR A LIMITED TIME SAVE 10% ON ALL FORMLABS RESIN WITH CODE FORM4LAUNCH
Image of Formlabs BioMed Clear Resin Cartridge for Form 4B 3D Printers

BioMed Clear V1, 1L | Form 4

by Formlabs
$502.50 - $502.50
$502.50
$502.50 - $502.50
$502.50
SKU RS-C2-BMCL-01

Formlabs BioMed Clear V1 resin is a hard, strong material for biocompatible applications requiring long-term skin or mucosal membrane contact. This USP Class VI-certified material is suitable for applications that require wear resistance and low water absorption over time. Parts printed with BioMed Clear Resin are compatible with standard sterilization methods. BioMed Clear Resin is manufactured in Formlabs' ISO 13485 facility and is supported with an FDA Device Master File.

Supports print resolutions: 100 ”m and 50”m

Post-curing is required.

Applications
  • End-use devices
  • Biocompatible prototypes, molds, jigs and fixtures
  • Models for visualization and implant sizing
  • Gas pathway connectors, adapters and devices
Material Properties | Post-cured at 60ÂșC for 60 min
  • Ultimate Tensile Strength: 52 MPa
  • Young’s Modulus: 2080 MPa
  • Elongation: 12%
  • Flexural Strength: 84 MPa
  • Flexural Modulus: 2300 MPa
  • Hardness Shore D: 78 D
  • Notched Izod: 35 J/m
  • Heat Deflection Temp @ 0.45 MPa: 67 ÂșC

Material properties may vary based on part geometry, print orientation, print settings, temperature, disinfection, or sterilization methods used.

3D Printer Compatibility
  • FormlabsÂź Form 4
  • FormlabsÂź Form 4B