BMD

Chamber O-ring for Desktop Metal Furnace  Compatible 3D Printers: Studio System Shop System

Chamber O-ring | Debinder for Studio System 3D Printer. O-ring creates a seal between the debind processing tank and lid. 

Metal Media Cartridge Foam Replacement foam for the alloy cartridge Compatible metal 3D printer: Studio System™

Alloy Cartridge for Studio System™ Refillable media cartridge used for "media fills". It is recommended one cartridge per alloy type.

Interface v.2 Media Cartridge Refillable media cartridge used for "media fills." It is used for interface v.2 only.

D2 Tool Steel v.2 Media Fill (810 cc) | 5.4 Kg It must be sintered in a high purity retort It requires high purity argon supplied through the exte...

4140 Chromoly Steel v.2 Media Fill (810 cc) | 4.2 Kg It must be sintered in a high purity retort It requires high purity argon supplied through th...

316L Stainless Steel v.2 Media Fill (810 cc) | 4.4 Kg It requires Gas no.1 (3% H2/Ar) supplied through the external gas connection. NOT SOLD by DE...

17-4 PH Stainless Steel V.2 (840cc) | 4.32 Kg Must be sintered in a high purity retort It requires Gas no.1 (3% H2/Ar) supplied through the exter...

Interface V.2 Media Fill (270cc), | 0.66 Kg The Interface V.2 Media Fill (270cc) contains sufficient media to fill an interface cartridge four (4)...

Ti64 | Titanium Alloy-4V v.1 Media Fill (810 cc) | 2.56 Kg* It can be sintered in the High Purity Retort only with the sintering getter (BMD-CF001...

4140 Chromoly Steel v.1 Media Fill (810 cc) Must be sintered in a high purity retort OR with the use of sintering getter (BMD-CF0018). It requires...

Compatible metal 3D printers: Desktop Metal Studio System™ 2 *Cartridges and media fills contain a set amount of material by volume. Weights are ...

17-4 PH Stainless Steel v.1 Media Fill (810 cc)  Compatible metal 3D printers: Desktop Metal Studio System™ 2 *Cartridges and media fills contain...

Copper v.1 Media Fill (810 cc) | 4.6 Kg* Must sinter in a high purity retort OR with the use of sintering getter (BMD-CF0018). It requires Gas no....

Sintering Getter (x20) The “sintering getter” is used to create a higher purity atmosphere by acting as a sacrificial material for impurities in t...

H13 v.1 Media Fill (810 cc) | 4.2 Kg* H13 tool steel is a chromium molybdenum hot work steel. Must be sintered in a high purity retort OR with the...

The Ceramic Release Layer™ is a crucial component of the BMD (Bound Metal Deposition™) process. The ceramic release layer is at the heart of Separa...

Interface Media Feed Tray for Studio System 3D Printer This tray sits below the cartridges and transfers the rod from the cartridge into the extruder.

Nozzle brush for Studio System 3D printer. Important: It is recommended one brush per material type. Quantity: 2 brushes per pack

The build media feed tray of the Studio System metal 3D printer houses the mechanism used to transition the media from a horizontal orientation to ...

Studio System 2 print sheets. Quantity: 50 sheets per pack

Setter plate | Furnace  Thin ceramic plates. Parts sit on top of the setter plate during sintering which keeps them from coming in contact with the...