Post-Processing Systems/Accessories

PLM-101-SUB PolyJet Support Removal Detergent by PostProcess™ for Submersed Vortex Cavitation (SVC) machines: DEMI 4000  DEMI 910 DEMI 800 Series ...

PLM-403-SUB Resin Removal Detergent by PostProcess™ to remove the excess resin of 3D-printed parts for Submersed Vortex Cavitation (SVC) machines: ...

Formlabs Resin Washing Solution is a non-flammable cleaning solution designed for removing resin from 3D-printed parts. This solution offers cleani...

The Spiral Chuck for Taper Shaft  The P91R spiral chuck is designed for right-side mounting, and P91L is for the left-side for cloth polishing/buf...

Collet for High-Speed Spindle  F106 Collets fit Foster and Wells spindles Fits F030 and F031 spindle models F112 Collets fit Demco alloy grinder...

Ray Foster's precision high-speed automatic spindle is designed for heavy duty, continuous operation. - Quiet and smooth running - It permits tool ...

Formlabs Form Cure (2nd Generation) precisely combines heat and 405 nm light to deliver tough, strong prints with unprecedented speed and consisten...

Formlabs Fuse Blast Polishing Agent, 115 ml conditions the Fuse Blast Polishing Media to improve polishing quality and prevent media clogging. The ...

Formlabs® Fuse Blast Polishing System is a drop-in upgrade to the Fuse Blast that allows users to add a smooth, semi-gloss, scuff-resistant, and dy...

Formlabs® Form Wash, 2nd. Generation Technical Specifications Dimensions: 31.5 x 29.3 x 40.5 cm | 12.4 x 11.5 x 15.9 in Height when open: 71.4 cm ...

M-CAC | Ceramic Abrasive Cylinder Surface Finish Media by PostProcess Technologies™ Used in combination with PLM-001-SURF media cleaning agent, fo...

M-CATS | Ceramic Abrasive Triangle Small Surface Finish Media by PostProcess Technologies™ Used in combination with PLM-001-SURF media cleaning ag...

M-CATL | Ceramic Abrasive Triangle Large Surface Finish Media by PostProcess Technologies™ Used in combination with PLM-001-SURF media cleaning ag...

M-SPC | Special Porcelain Ceramic Surface Finish Media by PostProcess Technologies™ Used in combination with PLM-001-SURF media cleaning agent, fo...

M-CTS | Ceramic Surface Finish Media by PostProcess Technologies™ Used in combination with PLM-001-SURF media cleaning agent, for Suspended Rotati...

M-CAT | Ceramic Abrasive Triangle Surface Finish Media by PostProcess Technologies™ Used in combination with PLM-001-SURF media cleaning agent, fo...

UPM2 | Polyester Abrasive Surface Finish Media by PostProcess Technologies™ Used in combination with PLM-001-SURF media cleaning agent, for Suspen...

PLM-SURF-001 | Polygone Surface Finish Detergent is a media cleaning agent used in combination with applicable abrasive or dye media, for the Suspe...

UPM2 | Small Porcelain Polishing Surface Finish Media by PostProcess Technologies™ Used in combination with PLM-001-SURF media cleaning agent, for...

UPM1 | Porcelain Polishing Surface Finish Media by PostProcess Technologies™ Used in combination with PLM-001-SURF media cleaning agent, for Suspe...

AUX-400-RINSE is an organic-based rinse solution developed as an effective alternative to Isopropyl Alcohol or IPA for the final rinse step in post...

AUX-101-SUB | PostProcess™ PolyJet Detergent Removes brittleness in PolyJet 3D-printed parts, sustained from support removal cleaning. Packaging O...

The Formlabs Ceramic Wash Solution is a specialized wash liquid for cleaning your ceramic 3D-printed parts. This solution requires a wash for part...

Dekema® Firing Table, Basis Hybrid, Ø 100 mm The firing table basis hybrid, Ø 100 mm, can be used on both sides, low trough and with numbered cavit...