Milling

Filter bags for iVAC eco imes-icore® suction system It comes in a pack of 5 pieces.

Filter-bag for CORiTEC suction systems iVAC eco+ and iCompVAC One piece per package

HEPA-Filter for imes-icore® iVAC eco+ Suction Units

5-piece filter-fleece for imes-icore® 350i CORiTEC milling machine

DESS® Adapter for Pre-milled Abutments It fits into a universal holder. Compatible Milling Machines imes-icore CORiTEC 150i imes-icore CORiTEC 2...

Medentika® Fixture for Universal Adapter The Medentika® adapter for pre-milled abutments fits into a universal holder. Compatible Milling Machine...

NT-trading® Adapter NT-trading® fixture for pre-milled abutments. It fits any universal adapter. Compatible Milling Machines CORiTEC 150i CORiTEC ...

Glass Ceramic Adapter for Universal Holder Glass-ceramics fixture for universal adapter Compatible Milling Machine CORiTEC 150i PRO CORiTEC 350i...

Universal Holder for CORiTEC 350i Series Universal adapter base plate for using glass-ceramic blocks or different abutment systems (NT-trading®, M...

imes-icore C-Clamp Holder for CORiTEC 150i Series Compatible Milling Machine CORiTEC 150i Series  

imes-icore C-Clamp Holder for CORiTEC 350i Loader Half-open blank holder No chuck jaw thrust washer and counter bracket required Aperture angle: 1...

Spare Part Cover WZW with attachments | CORiTEC 350i Loader PRO & PRO+  

Safety interlock cover-switch for CORiTEC 350i / 350i Loader with electric cabinet -machine side.

Spare Part Safety Circuit | imes-icore® CORiTEC 350i Logosol 350i, CNC-SK-2310g2

Servo Drive | imes-icore® CORiTEC 350i Milling Systems Servo drive Logosol 350i LS-163m1g2-860 mBUS Servo Board 8A peak 60V max.

Timing Belt 16 AT5 - 280 | CORiTEC 350i Systems

Actuator for Safety Switch | No. 562047

imes-icore® Adapter-Rings for 8 mm Blanks Used as shims to adapt the blank-holder to allow thinner discs (8 mm) Compatible machines: CORiTEC milli...

DESS® Starterkit - Pre-milled Abutments with Six (6) Preface Abutments Shaft Options 3 mm 6 mm

Blank Holder for CORiTEC 150i Series 98 mm blank holder made of aluminum for CORiTEC 150i/CORiTEC one+ incl. torque screwdriver.

Splashguard Flex Belt for imes-icore® Milling Machines: CORiTEC 240i CORiTEC 340i CORiTEC 440i

imes-icore® T98 Shaft Milling Tool, Calibration tool with three blades  Length: 20 mm Diameter: 2.5 mm Shaft: 6 mm Compatible Milling Systems C...

imes-icore® Radius Milling Tool - T18 | Two Cutters Tool Length: 4 mm Diameter: 0.5 mm Shaft: 6 mm Material: Universal It includes a pre-mounted f...

imes-icore® Radius Milling Tool - T20 Shape: Conical Diameter: 0.6 mm Shaft: 3.0 mm Material: Titanium & Cobalt Chrome It includes a pre-moun...

imes-icore® Radius Milling Tool, T16 | Two Baldes Length: 15 mm Diameter: 1.5 mm Shaft: 3 mm Material: PMMA/Wax/Zirconia It includes a pre-mounte...

Radius Milling Tool, T4/T9 | 1,0 mm Diameter: 1.0 mm Shaft: 3 mm Length: 9 mm Material: Titanium & Cobalt-Chrome It includes a pre-mounted fix...

imes-icore® Shaft Milling Tool, T19 Diameter: 0.5 mm Shaft: 3 mm Length: 4 mm Material: Universal It includes a pre-mounted fixation ring Usable u...

imes-icore® Shaft Milling Tool - T30, Single blade, slide coated Length: 32 mm Diameter: 4.0 mm Shaft: 6 mm Material: PMMA WAX PEEK It includes ...

imes-icore® Radius Milling Tool, Two Blades - T34 Tool Length: 27 mm Diameter: 3.0 mm Shaft: 6 mm Material:  PMMA WAX It includes a pre-mounted ...

imes-icore® Radius Milling Tool - T35, Two Blades Length: 20 mm Diameter: 2.0 mm Shaft: 6 mm Material: PMMA WAX It includes a pre-mounted fixing...

imes-icore® Shaft Milling Tool -T26 | Conical, Two Blades Diameter: 3.0 mm Shank: 6.0 mm Material: Titanium, Chrome Cobalt Material Height: Up t...

imes-icore® T27 Milling Tool | Conical, Two Blades Diameter Size: 2.0 mm Shank: 6.0 mm Material: Titanium, Chrome Cobalt Up to 20 mm material heig...

imes-icore® Radius Milling Tool | T29 Tool No: T29 Size: 1.0 mm Shank: 6.0 mm Material: Titanium, Chrome Cobalt Feature: Conical, 2 blades, up to ...

imes-icore® Shaft Milling Tool -T5/T10 | Four Blades Length: 12 mm Diameter: 1.5 mm Shaft: 6 mm It includes a pre-mounted fixing ring Usable up to...

imes-icore® Shaft Milling Tool - T17 Diameter: 1.5 mm Shaft: 6 mm Material: PMMA Wax Zirconia It includes a pre-mounted fixing ring Usable up to...

imes-icore® Radius Milling Tool - T18 | Two Cutters Diameter / Tip: 0.5 mm Shaft: 6 mm Length: 4 mm Material: Universal

imes-icore® Shaft Milling Tool - T19 Tool length: 4 mm Diameter: 0.5 mm Shaft: 6 mm Material: Universal-type It includes a pre-mounted fixing ring...

imes-icore® Radius Milling Tool - T33/T43/T53 | Two Cutters Diameter: 0.3 mm Shaft: 6 mm Shape: Conical Material: PMMA WAX Zirconia Sintered Met...

imes-icore® T61 Quattro Speed Milling Tool  Length: 15 mm Diameter: 3.0 mm Shaft: 6 mm Material: Titanium Cobalt Chrome It includes a pre-mount...

imes-icore® Drilling Tool - T80 Length: 22 mm Diameter: 2.5 mm Shaft: 6 mm Material: Titanium Cobalt Chrome  It includes a pre-mounted fixing ...

Calibration Block for CORiTEC 140i & CORiTEC One Size: 40 x 20 x 15mm

imes-icore® Collet 3 mm for high-frequency (HF) 42 mm spindle - 60.000 rpm  Compatible Milling Systems CORiTEC 440i CORiTEC 450i 4820 3020

Tool Holder | 3mm shaft with spring and Seeger ring, without socket. Compatible Milling Systems CORiTEC 140i CORiTEC 245i CORiTEC 250i CORiTEC 340...

Tool Holder 6 mm shaft with spring, Seeger ring and socket pre-mounted.  Compatible Milling Machines CORiTEC 440i CORiTEC 450i CORiTEC 550i CORiTE...

Cleaning Kit for Jäger 33 mm & 42 mm shaft spindles 3mm Shank (Small) 6mm Shank (Big) The kit includes the following: Collet grease Felt spi...

Splashguard Changeable Magnetic for imes-icore® Milling Machines: CORiTEC 240i CORiTEC 340i CORiTEC 440i

Filter-fleece for CORiTEC 350i Loader milling machine from imes-icore. It comes in a pack of 5 pieces.

Calibration set for all machine systems in a calibration box.The set contains: Dial indicator Magnetic holding systems Calibration disc metal Cali...