BioMed Clear Resin, 1L

Formlabs BioMed Clear resin is a hard, strong material for biocompatible applications requiring long-term skin or mucosal membrane contact. This USP Class VI-certified material is suitable for applications that require wear resistance and low water absorption over time. Parts printed with BioMed Clear Resin are compatible with standard sterilization methods. BioMed Clear Resin is manufactured in Formlabs' ISO 13485 facility and is supported with an FDA Device Master File.

Supports print resolutions: 100 µm and 50µm

Post-curing is required.

Applications

• End-use devices
• Biocompatible prototypes, molds, jigs + fixtures
• Models for visualization and implant sizing
• Gas pathway connectors, adapters + devices

Material Properties | Post-cured at 60ºC for 60 min

• Ultimate Tensile Strength: 52 MPa
• Young’s Modulus: 2080 MPa
• Elongation: 12%
• Flexural Strength: 84 MPa
• Flexural Modulus: 2300 MPa
• Hardness Shore D: 78 D
• Notched Izod: 35 J/m
• Heat Deflection Temp @ 0.45 MPa: 67 ºC

Material properties may vary based on part geometry, print orientation, print settings, temperature, disinfection, or sterilization methods used.

3D Printer Compatibility

• Form 2
• Form 3B
• Form 3BL
• Form 3B+

Resin Tank Compatibility

• Form 2 LT Tank
• Form 3/3B Resin Tank V1
• Form 3/3B Resin Tank V2
• Form 3/3B Resin Tank V2.1
• Form 3L/3BL Resin Tank V1
• Form 3L/3BL Resin Tank V2