Desktop Metal

The debinder fluid is a substance/mixture used for the binder removal from the parts that are 3D printed with Desktop Metal's 3D printer, Studio Sy...

Desktop Metal Studio System | 2 print sheets. Quantity: 50 sheets per pack

A2 v.2 Media Fill (810 cc) | Desktop Metal Qualified 3D Printing Material Must be sintered in a high-purity retort Requires high-purity argon supp...

Desktop Metal Nickel Alloy IN625 v.2 Media Fill (810 cc) for Studio System metal 3D printer  Must be sintered in a high-purity retort Requires Gas...

Desktop Metal H13 v.2 Media Fill (810 cc)/Metal Rods | No cartridge included Must be sintered in a high-purity retort Requires high-purity argon s...

Desktop Metal's retort base stabilizes the stacking retort assembly and directs gas past the sintering getter (when used). Studio System Shop Syst...

Desktop Metal's Retort Top encloses the stacking retort assembly within the sintering furnace. Studio System Shop System It is part of the assemb...

Desktop Metal's Retort Ring supports the furnace trays and encloses the parts during sintering. The furnace tray is installed into the retort rings...

Desktop Metal Pump Discharge Filter Rebuild Kit | Studio System Furnace consumable for preventive maintenance, specifically for replacing the furna...

Chamber O-ring for Desktop Metal Furnace  Compatible 3D Printers: Studio System Shop System

Chamber O-ring | Debinder for Studio System Bound Metal Deposition 3D Printer. O-ring creates a seal between the debind processing tank and lid. 

Desktop Metal T1 or T2 Furnace Thermocouples (set of 2) Compatible 3D Printers Shop System Studio System NOTE: A service technician is required w...

Desktop Metal Metal Media Cartridge Foam Replacement foam for the alloy cartridge Compatible metal 3D printer: Studio System™

Alloy Cartridge for Studio System™ Refillable media cartridge used for "media fills". It is recommended one cartridge per alloy type.

Desktop Metal Interface v.2 Media Cartridge Refillable media cartridge used for "media fills." It is used for interface v.2 only.

D2 Tool Steel v.2 Media Fill (810 cc) | 5.4 Kg It must be sintered in a high-purity retort It requires high purity argon supplied through the exte...

4140 Chromoly Steel v.2 Media Fill (810 cc) | 4.2 Kg It must be sintered in a high purity retort It requires high purity argon supplied through th...

316L Stainless Steel v.2 Media Fill (810 cc) | 4.4 Kg It requires Gas no.1 (3% H2/Ar) supplied through the external gas connection. NOT SOLD by DE...

Desktop Metal 17-4 PH Stainless Steel V.2 (840cc) Metal Rods | 4.32 Kg Must be sintered in a high purity retort It requires Gas no.1 (3% H2/Ar) -...

Desktop Metal Interface V.2 Media Fill (270cc), | 0.66 Kg The Interface V.2 Media Fill (270cc) contains sufficient media to fill an interface cart...

Ti64 | Titanium Alloy-4V v.1 Media Fill (810 cc) | 2.56 Kg* It can be sintered in the High Purity Retort only with the sintering getter (BMD-CF001...

4140 Chromoly Steel v.1 Media Fill (810 cc) | Metal Rods for Metal 3D Printing Must be sintered in a high purity retort OR with the use of sinteri...

316L Stainless Steel v.1 Media Fill (810 cc) | Metal Rods   3D Printer Compatibility Desktop Metal Studio System™ 2 *Cartridges and media fills c...

17-4 PH Stainless Steel v.1 Media Fill (810 cc) | Metal Rods for Metal 3D Printing Material Properties* | Heat Treat H900 Yield Strength: 970 MPa ...