Milling

Servo Drive | imes-icore® CORiTEC 350i Milling Systems Servo drive Logosol 350i LS-163m1g2-860 mBUS Servo Board 8A peak 60V max.

Timing Belt 16 AT5 - 280 | CORiTEC 350i Systems

Blank Holder for CORiTEC 150i Series 98 mm blank holder made of aluminum for CORiTEC 150i/CORiTEC one+ incl. torque screwdriver.

The PASTE FLUID has been specially adjusted to maintain the consistency of the pastes. It is used to mix almost dried or dried pastes again withou...

VITA AKZENT® PLUS materials are fluorescent ceramic stains which can be usedfor internal colouring during layering or external finishing and glazin...

VITA AKZENT PLUS* CHROMA STAINS paste is used in finishing stains for systematic control of the chromaticity of the restoration. This kit includes:...

VITA AKZENT® PLUS materials are fluorescent ceramic stains which can be usedfor internal colouring during layering or external finishing and glazin...

ENAMIC High-gloss Polishers (grey), 6 pcs.  Tip, VI-ES5f wheel, VI-ER15f Designation High-gloss polishing (grey) Details Diamond-coated

The VITA SUPRINITY Pre-Polishing Sets (6-pieces each) were developed for reliable, efficient and material-specific surface treatment of zirconia-re...

The VITA SUPRINITY Polishing Sets (6-pieces each) were developed for reliable, efficient and material-specific surface treatment of zirconia-reinfo...

The VITA SUPRINITY Polishing Sets, 6 pieces each, were developed for reliable, efficient and material-specific surface treatment of zirconia-reinfo...

The VITA SUPRINITY Polishing Sets were developed for reliable, efficient and material-specific surface treatment of zirconia-reinforced lithium sil...

The VITA SUPRINITY Polishing Sets were developed for reliable, efficient and material-specific surface treatment of zirconia-reinforced lithium sil...

The VITA ENAMIC® polishing sets were developed for reliable, efficient and material-specific surface treatment of hybrid ceramic restorations in de...

The VITA SUPRINITY Polishing Sets were developed for reliable, efficient and material-specific surface treatment of zirconia-reinforced lithium sil...

VITA YZ BRUSH SET Brush (size 2 and 4), 2 pieces Metal-free brush used in manual colouring by using the brush technique

ENAMIC Pre-Polishers, RA pink cup, 6 pcs. The VITA ENAMIC polishing sets were developed for material-specific surface treatment of restorations mad...

The VITA ENAMIC® polishing sets were developed for reliable, efficient and material-specific surface treatment of hybrid ceramic restorations in de...

VITA ENAMIC polishing instruments were developed for reliable, efficient and material-specific surface treatment of hybrid ceramic restorations in ...

Torus grinding tools for glass ceramics Diameter: 0.6 mm 1.2 mm Thickness: 3 mm Overall Tool Length: 35 mm The two torus grinding tools with th...

Milling cutters for non-precious metal alloys (CoCr and Titanium*) Diameter Sizes: 0.6 mm 1.0 mm 1.2 mm Thickness : 3 mm Material: Carbide-coate...

Milling Cutters for Composites | Double radius cutters. Available Diameters: 1.0 mm and 2.0 mm Thickness: 3 mm Material: Carbide-coated Overall to...

Milling cutters for composites | Single tooth radius cutters. Available Diameters: 1.0 and 2.0 mm Thickness: 3 mm Material: Diamond-coated Overall...

Milling cutters for zirconium oxide. Shaft: 3 mm Diameter: 1.2 mm Material: Diamond-coated Overall Tool Length: 35 and 40 mm Tool-base colour: Da...

Milling cutters for zirconium oxide. Shaft: 3 mm Diameter: 0.6 mm Material: Diamond-coated Overall Tool Length: 35 and 40 mm Tool-base colour: Dar...

Triple radius milling cutters for zirconium oxide. Thickness: 3 mm Diameter Size: 2 mm Material: Carbide and Diamond Coated Overall Tool Length: 3...

Double Radius Milling Cutters for Zirconium Oxide. Thickness: 3 mm Diameter Size: 1 mm Material: Carbide and Diamond Coated* Overall Tool Length:...

Milling cutters for wax and plastics (PMMA) Shaft: 3 mm Material Type: Carbide Overall Tool Length: 40 mm vhf System Compatibility K5 R5 S1 S2

Single milling radius cutters for wax and plastics (PMMA) Shaft: 3 mm Material Type: Carbide Overall Tool Length: 40 mm  vhf System Compatibilit...

Cylindric milling cutters for wax and plastics (PMMA) Diameter: 2.5 mm Thickness: 3 mm Material Type: Carbide Overall Tool Length: 35 mm & 40 ...

Milling cutters for wax and plastics (PMMA) Thickness: 3 mm Diameter: 1.0 mm & 2.0 mm Material Type: Carbide Overall Tool Length: 35 mm Tool-...

Single tooth milling radius cutters for wax and plastics (PMMA) Thickness: 3 mm Diameter: 1.0 mm & 2.0 mm Material Type: Carbide Overall Tool...

Cylindric Double Cutter, Universal* Thickness: 3 mm  Diameter: 1.2 mm Overall Length: 40 mm Material: Carbide/Coated *Suitable for machining wax ...

Double Radius Cutter with Coating, Universal* Thickness: 3 mm Diameter: 0.6 mm Overall Length: 40 mm Material Type: Carbide/Coated *Suitable for ...

Cylindric Double Cutter, Universal* Shaft: 3 mm Diameter: 0.5 mm Overall Length: 40 mm Material: Carbide *Suitable for machining wax and plastics...

Double Radius Cutter, Universal* Thickness: 0.3 mm Diameter: 0.3 mm Overall Length: 40 mm Material: Carbide *Suitable for machining wax and plast...

Universal* Tool, Cylindric Double-Cutter Shaft: 3 mm Diameter: 1.2 mm Overall Length: 35 mm Material: Carbide/Coated *Suitable for machining wax ...

Double Radius Cutter with Coating, Universal* Shaft: 3 mm Diameter: 0.6 mm Overall Length: 35 mm Material Type: Carbide/Coated *Suitable for mach...

Cylindric double cutters, universal* Shaft: 3 mm Diameter: 0.5 mm Overall Length: 35 mm Material: Carbide *Suitable for machining wax and plasti...

Double radius cutter, universal* #1001 Shaft: 3 mm Diameter Size: 0.3 mm Overall Length: 35 mm *Suitable for machining wax and plastics (PMMA), ...

VITABLOCS® Mark II  Classical are monochromatic, tooth-coloured feldspar blanks with shades that match those of residual teeth Features/Benefits F...