Products

17-4 PH Stainless Steel Powder (100 kg) | Material for Desktop Metal's Shop System metal 3D printer, binder jetting technology. Material Properties...

17-4 PH Stainless Steel v.1 Media Fill (810 cc) | Metal Rods for Metal 3D Printing Material Properties* | Heat Treat H900 Yield Strength: 970 MPa ...

Desktop Metal 17-4 PH Stainless Steel V.2 (840cc) Metal Rods | 4.32 Kg Must be sintered in a high purity retort It requires Gas no.1 (3% H2/Ar) -...

316L Stainless Steel v.1 Media Fill (810 cc) | Metal Rods   3D Printer Compatibility Desktop Metal Studio System™ 2 *Cartridges and media fills c...

316L Stainless Steel v.2 Media Fill (810 cc) | 4.4 Kg It requires Gas no.1 (3% H2/Ar) supplied through the external gas connection. NOT SOLD by DE...

4140 Chromoly Steel v.1 Media Fill (810 cc) | Metal Rods for Metal 3D Printing Must be sintered in a high purity retort OR with the use of sinteri...

4140 Chromoly Steel v.2 Media Fill (810 cc) | 4.2 Kg It must be sintered in a high purity retort It requires high purity argon supplied through th...

A2 v.2 Media Fill (810 cc) | Desktop Metal Qualified 3D Printing Material Must be sintered in a high-purity retort Requires high-purity argon supp...

Alloy Cartridge for Studio System™ Refillable media cartridge used for "media fills". It is recommended one cartridge per alloy type.

Binder Trap Liner for Desktop Metal's furnace units. Packaging 24 pieces/package Note: The binder trap liner replacement process can be triggered...

Desktop Metal Binder SS-01 (10L) for Shop System Metal 3D Printer Compatible 3D Printer Desktop Metal Shop System

The Build Media Feed Tray of the Desktop Metal Studio System metal 3D printer houses the mechanism for transitioning the media from a horizontal to...

Chamber O-ring | Debinder for Studio System Bound Metal Deposition 3D Printer. O-ring creates a seal between the debind processing tank and lid. 

Chamber O-ring for Desktop Metal Furnace  Compatible 3D Printers Studio System Shop System

Copper v.1 Media Fill (810 cc) | 4.6 Kg* Must sinter in a high-purity retort OR with the use of a sintering getter (BMD-CF0018). It requires Gas n...

D2 Tool Steel v.2 Media Fill (810 cc) | 5.4 Kg It must be sintered in a high-purity retort It requires high purity argon supplied through the exte...

The debinder fluid is a substance/mixture used for the binder removal from the parts that are 3D printed with Desktop Metal's 3D printer, Studio Sy...

The material tray for ETEC®'s PRO XL DLP 3D printer consists of two plastic frames with a special membrane called Pre-Stretched Assembly (PSA) betw...

The Desktop Metal Furnace Tray is installed into the retort ring and supports the parts during the sintering process following the metal 3D printin...

Desktop Metal H13 v.1 Media Fill / Metal Rods (810 cc) | 4.2 Kg* H13 tool steel is a chromium molybdenum hot work steel. Must be sintered in a hig...

Desktop Metal H13 v.2 Media Fill (810 cc)/Metal Rods | No cartridge included Must be sintered in a high-purity retort Requires high-purity argon s...

Interface Media Cartridge v.1 for Desktop Metal Studio System The Ceramic Release Layer™ is a crucial component of the BMD (Bound Metal Depositi...

Desktop Metal Interface v.2 Media Cartridge Refillable media cartridge used for "media fills." It is used for interface v.2 only.

Desktop Metal Interface Media Feed Tray for Studio System 3D Printer This tray sits below the cartridges and transfers the rod from the cartridge i...