3D Scanning

4-meter USB 2.0 cable to connect the scanner to the laptop. Compatible 3D Scanners Go!SCAN 20 Go!SCAN 50

Creaform MaxSHOT Next Extension Pole with Remote Control The MaxSHOT 3D extension pole, which is 3.3 m (10 ft.) long and has a remote control, was ...

Creaform Magnetic Support Kit for Scale Bars Kit of 2 magnetic support clamps for scale bars. Compatible Scanner MaxSHOT 3D Next MaxSHOT Next | ...

Creaform MaxSHOT Next Carrying Case Ergonomic protective case equipped with a custom foam insert. Dimensions: 136.7 x 41.9 x 17 cm (53.8 x 16.5 x ...

Creaform Magnetic Support designed for HandySCAN 3D scanners Compatible 3D Scanners HandySCAN 300 HandySCAN 700 HandySCAN 307 HandySCAN 307 | Elit...

Creaform HandySCAN BLACK Carry-on Case for Aluminium Calibration Plate Ergonomic protective case for aluminum calibration plate equipped with a cus...

Creaform Starter Kit of Probe Accessories for HandyPROBE The kit includes: 1 x Smart Connect probe adaptor 1 x 100 mm M4 ceramic probe extension, ...

Creaform HandyPROBE Next | Accessories Case for Probes An ergonomic protective case with a custom foam insert for a probe accessory kit. Dimension...

Creaform USB 3.0 cable (2.4m) for C-Track (4th Gen.) The 2.4-m (8-ft) USB 3.0 cable connects the C-Track to the controller for C-Track Shop-Floor S...

Dynamic Referencing Kit C-Track calibration bar holder and tripod for Dynamic Environment Compensation 3D Scanners Compatibility C-Track  C-Track ...

Creaform Lithium-ion Battery 98 Wh Portable and lightweight external battery delivering up to four hours of autonomy. Battery must be used in pair ...

Creaform Portable Workstation includes: custom carrying case with foams all-terrain wheels and mobile desk. Designed for Creaform-certified lapto...

Creaform' 3D Scanning Manual Turntable facilitates the scanning of small objects. Offers an alternative to applying positioning targets on the part...

Creaform Calibration Bar for HandyPROBE Next - Recertified

Creaform Scrappers for 3D Scanning Targets Plastic scrapers to facilitate gentle removal of adhesive targets. Available in: Kit of 3 pieces Kit of...

Technical Specs: Input : 100-240 V ~ 50-60 Hz 0.8 A. Output : 18 V 1.66 A 19.92 W max. Compatible with: HandySCAN 300 HandySCAN 307 HandySCAN 70...

Carry-on case for HandySCAN 300/700 for easy transportation and maximum portability. *3D Scanner and accessories sold separately.

Creaform 8-meter (26-ft.) USB 3.0 Cable, powered by a standard 18V power supply connects the scanner to the laptop. Compatible 3D scanners HandySC...

Creaform Calibration Plate for HandySCAN 300/700 The calibration procedure involves bringing the scanner to the positions highlighted by the green ...

The Creaform Triangular References are designed for the Go!SCAN 20 scanner. These triangular scan references provide targets* at a 45° angle to fac...

Creaform Go!SCAN 20 Carry-on Case for easy transportation and maximum portability. *The images shown are for illustration purposes only and may not...

Creaform Go!SCAN 50 Calibration Plate. The calibration procedure involves bringing the 3D scanner to the positions highlighted by the green shadow ...

Creaform Go!SCAN 20 Calibration plate The calibration procedure consists of bringing the 3D scanner to the positions highlighted by the green shado...

The Creaform Ergonomic Protective Case has a custom foam insert for the precision bar 648 mm, with MetraSCAN 3D and HandyPROBE. Dimensions: 78.74 ...

Creaform Tripod + dedicated ball head for HandyPROBE Sturdy aluminum tripod with extendable and adjustable legs based on a solid center brace struc...

Swivel Head Part for HandyPROBE Support  It holds the C-Track sensor onto the tripod. Compatible 3D Scanners C-Track 380 C-Track 780 C-Track 1480 ...

Creaform Ruby Probe Diameter: 3 mm Length: 50 mm M4 thread Compatible 3D Scanner HandyPROBE HandyPROBE Next

Ruby probe: Diameter: 3 mm Length: 20 mm M4 thread Compatible with: HandyPROBE HandyPROBE Next

Creaform Magnetic Base for swivel optical reflectors, Ø 6 mm pins. Compatible 3D Scanners C-Track 380 C-Track 780 C-Track 1480 C-Track | Elite Max...

Creaform Ethernet Cable, 7.5-meter (24-ft), connects the 3D scanner controller to the laptop.

The C-Link functionality for virtual CMM rooms comprises a connecting kit (hardware and software) that enables simultaneous measurement with up to ...

Creaform Calibration Bar for HandyPROBE Next

Creaform Calibration Sphere HandyPROBE with support. Compatible with: HandyPROBE  HandyPROBE Next

Tool to fix the SmartConnect adapter on the HandyPROBE stylus. Compatible with: HandyPROBE  HandyPROBE Next

Creaform - Glass-protected magnetic reflector Ø12mm @ 0°  It is an easy-to-remove, magnetic, and reusable reflector designed for metallic surfaces....

The 24V docking system with a Lithium-Ion battery is portable and lightweight, delivering up to four hours of autonomy.  Dimensions: 18.3 x 8.2 ...