BioMed Durable, 1L

Formlabs BioMed Durable Resin is a clear material for biocompatible applications requiring impact, shatter, and abrasion resistance. It is USP Class VI material made in an FDA-registered, ISO 13485 facility and can be used in applications for long-term skin (>30 days) and short-term tissue, bone, dentin, and mucosal membrane contact (<24hrs).

• Impact, shatter, and abrasion resistant
• Biocompatible and quality controlled
• Excellent clarity and surface finish

Applications

• Patient-specific instruments
• Single-use instruments
• End-use devices and components requiring biocompatibility and impact resistance

Material Properties

• Ultimate Tensile Strength: 29.1 MPa
• Tensile Modulus: 994 MPa
• Elongation at Break: 33%
• Flexural Strength: 21 MPa
• Flexural Modulus: 643 MPa
• Hardness Shore D: 75D
• Notched Izod: 98 J/m
• Heat Deflection Temp @ 0.45 MPa: 46 ºC

Material properties may vary based on part geometry, print orientation, print settings, temperature, and disinfection or sterilization methods used. Data were measured on post-cured samples printed on a Form3B with 100um BioMed Durable Resin settings, washed in a Form Wash for 10 minutes in 99% Isopropyl Alcohol, and post-cured at 60°C, 20 minutes in a Form Cure.

3D Printer Compatibility

• Form 3B
• Form 3B+
• Form 3BL

Resin Tank Compatibility

• Form 3/3B Resin Tank V2.1
• Form 3L/3BL Resin Tank V2

Build Platform Compatibility

• Form 3 Build Platform
• Form 3 Build Platform 2
• Form 3L Build Platform
• Form 3L Build Platform 2