3D Printing Parts

The build platform is an assembly comprised of: A large, flat platform A handle A connection cavity The flat area of the build platform is where ...

Experience flawless 3D printing with Formlabs Form 3's Resin Tank - featuring the innovative Low Force Stereolithography (LFS)™ technology. LFS tra...

The Desktop Metal Furnace Tray is installed into the retort ring and supports the parts during the sintering process following the metal 3D printin...

EnvisionOne (E1) Domeless 3D Printing Material Tray Disposable. It includes a cover lid. 3D Printer Compatibility ETEC EnvisionOne

ETEC D4K Pro Material Tray How to install the material tray: Open the printer door Release the front and back tilt tray clips Note that the tilt t...

EnvisionOne High Temperature (HT) Domeless Material Tray Disposable.

Chamber O-ring for Desktop Metal Furnace  Compatible 3D Printers: Studio System Shop System

Chamber O-ring | Debinder for Studio System Bound Metal Deposition 3D Printer. O-ring creates a seal between the debind processing tank and lid. 

Desktop Metal T1 or T2 Furnace Thermocouples (set of 2) Compatible 3D Printers Shop System Studio System NOTE: A service technician is required w...

The Build Media Feed Tray of the Studio System metal 3D printer houses the mechanism used to transition the media from a horizontal orientation to ...

Desktop Metal Interface Media Feed Tray for Studio System 3D Printer This tray sits below the cartridges and transfers the rod from the cartridge i...

The D4K Build Platform, also known as Build plate, Build tray or Print-bed, it is the surface of the D4K Pro printer on which the 3D printed part i...

Formlabs Form 3L Resin Tank V2* Discover the power of Low Force Stereolithography (LFS)™ 3D printing, which utilizes linear illumination, and a fle...

Form 2 Resin Tank LT was designed for printing in a high-volume production environment. It offers a longer tank lifetime for some Formlabs resins a...

The Formlabs Resin Tank blocks light and is made from shatter-resistant polycarbonate. It comes with a reusable lid and wiper, making it easy to st...

Speed up your workflow and allow for continuous printing, whether changing resins or starting a new print while removing your part by having handy ...

Build Platform 2 with patented Quick Release Technology allows you to quickly and easily remove parts from the build platform without tools in seco...

The Stainless Steel Build Platform is a corrosion-resistant build platform made with surgical-grade stainless steel. With a seamless look, this bui...

Boost your productivity and achieve continuous printing with Formlabs Form 3L Build Platforms. It has two side handles for effortless transportatio...

Minimize production downtime and enhance workflow efficiency with the Fuse 1 generation printers and Fuse Sift, a powder recovery system. Formlabs'...

Maximize your productivity and minimize downtime with the innovative solution from Formlabs - Fuse 1 and Fuse Sift (Formlabs' powder recovery syste...

Alloy Cartridge for Studio System™ Refillable media cartridge used for "media fills". It is recommended one cartridge per alloy type.

Fuse QT Heater ensures uniform heating of the printer bed. It is sold individually. 3D Printer Compatibility Fuse 1 Fuse 1+ 30W

Formlabs Form 3 and Form 3B compatible roller holders allow smooth movement of the LPU (light processing unit) housing across the flexible film int...

Formlabs Build Platform 2L with patented Quick Release Technology allows users to quickly and easily remove 3D-printed parts from the build platfor...

Stainless Steel Building Platform for 2CREATE laser powder bed fusion 3D printer. Depending on the application, different substrate plates must be ...

Desktop Metal's Retort Ring supports the furnace trays and encloses the parts during sintering. The furnace tray is installed into the retort rings...

Desktop Metal's Retort Top encloses the stacking retort assembly within the sintering furnace. Studio System Shop System It is part of the assemb...

Desktop Metal's retort base stabilizes the stacking retort assembly and directs gas past the sintering getter (when used). Studio System Shop Syst...

Silicone coater lip coater for 2OneLab's 2CREATE metal 3D printer ensures optimum print quality thanks to its flexibility. It is recommended to cha...

Pre-Filter, Non-reactive for 2OneLab's 2CREATE metal 3D printer. The pre-filter of the 2CREATE collects most of the smoke generated during the proc...

Particle Filter H13 | Non-reactive  The HEPA main filter can filter even the smallest dirt particles from the process gas. This protects the motor ...

Spare Bottle with Matching Flange! | For 2CREATE Laser Powder Bed Fusion Metal 3D Printer It is designed to integrate with the 2CREATE overflow sys...

Replacement Screen for the 2Sieve Station by 2OneLab This screen features a mesh size of 63µm and is crafted from a specialized fabric, optimized f...

Cartridge Filter for the 2CREATE and 2CREATE+ systems. This cartridge filter ensures reliable purification of the exhaust air from the unit. The sp...

Protection Glass for 2CREATE Metal 3D Printer The high-performance protective glass for the 2CREATE is made of premium quartz glass and features a ...

Coater Knife Plate The silicone lip on the Coater of the 2CREATE is held in position with the Coater Knife Plate. This component should only be rep...

The material tray for ETEC®'s PRO XL DLP 3D printer consists of two plastic frames with a special membrane called Pre-Stretched Assembly (PSA) betw...

The Fuse Series Optical Cassette is an essential tool for 3D printing with Formlabs selective laser sintering (SLS) technology. With its easy, tool...

Titanium Building Platform for 2oneLab's 2CREATE laser powder bed fusion 3D printer. Depending on the application, different substrate plates must ...

Aluminum Building Platform for 2oneLab's 2CREATE laser powder bed fusion 3D printer. Depending on the application, different substrate plates must ...

Electromagnetic Door Lock for 2oneLab's 2CREATE product family. 2CREATE and 2CREATE Plus are laser powder bed fusion 3D printers for commercial and...

Einstein Platform Assembly | ETEC The build platform is an assembly comprised of: A large, flat platform A handle A connection cavity The flat ar...

Resin Tray for Einstein™ 3D Printer The material tray consists of two frames with a special membrane called Pre-Stretched Assembly (PSA) between th...

Formlabs' Resin Pumping System is an accessory for Form 3 Series stereolithography (SLA) 3D printers that seamlessly delivers 5L of resin directly ...

Formlabs® Form 4 Flexible Film Resin Tank The Form 4 flexible film resin tank is a durable resin tank that reduces the forces exerted on 3D-printed...