Menu
Cart 0

Finishing Station for Metal 3D Printed Parts

Fortune Metal

FORTUNEMETALCABINET1

  • $9,000.00


Fortune Metal 3D Suction Blast Cabinet

For surface preparation and finishing for metal production parts made with additive manufacturing

The Fortune Metal 3D Suction Blast Cabinet surface preps additive-manufactured metal production parts, leaving them with a consistent finish over their entire surface. The cabinet fits into tight office and industrial workspaces yet is versatile and rugged enough to finish a wide range of parts with complex geometries.

Technical Specs

  • BNP Blast Gun: 1/8” air jet and a 5/16” ceramic nozzle
  • Air Consumption: 21 CFM at 80 psi
  • Electrical: 115V, 1 PH, 60 Hz
  • Amp Draw: 8
  • Cabinet Work Grating: 50 lb uniform load
  • Work Chamber: 24” W x 18” D x 19” H
  • Viewing Area: 16.5” W x 8.5” H

Advantages

  • Easy to operate and maintain.
  • Compact, free-standing design.
  • Safe for use in office and industrial environments. Quiet operation.
  • Uses most common 60-to-180 mesh abrasives: glass bead, steel shot, aluminum oxide, and more. *Not for use with silica sand.

Features

  • 14ga steel construction
  • Interior-mounted blast gun is height and angle adjustable, and also can be detached and handheld.
  • High-output, 50-watt LED light for excellent visibility
  • Flip-up, top-access door with laminated-safety-glass view window.
  • Safety interlock stops blasting if window is opened
  • Pressure regulator and gauge to monitor and adjust blast pressure for different finishes.
  • Moisture separator removes condensed water from air supply
  • Clear media hose allows visibility of media flow
  • Lever-operated valve, quick-drain hopper makes disposing of worn-out media a quick, simple, and clean process. It is designed to release into a standard-size, 5-gallon bucket.

300 CFM Dust-Bag Drum Collector

  • Optimizes visibility inside the cabinet while blasting.
  • Exhaust noise level is approximately 80 dBa when located in an open space.
BNP® Blast Gun
  • Foot-operated pedal.
  • Fixed, interior mount is height and angle adjustable.
  • Gun can quickly be detached from mount and then handheld.
  • Equipped with a 1/8” air jet and a 5/16” ceramic nozzle. (Air consumption is 21 CFM at 80 psi.)
  • Can be fitted with a tungsten-carbide or boron-carbide nozzle, depending on abrasive used.
  • Knurled nut at gun outlet allows operator to change nozzles without using tools.
  • Efficiently designed mixing chamber eliminates slugging and uneven media flow.

We Also Recommend